GASO T100 (101T-4) Triplex Plunger Pump Get a Quote!
IEQ is an OEM supplier of the GASO T100 Pump. Let the friendly customer service staff at IEQ Industries help you find the GASO Pump you need.
Download this data in PDF form.
Specifications
Pump Size:
maximum plunger size x stroke length, in.(mm)
3.375 x 4.500 (85.725 x 114.3)
Rated BPH:(kW) at 400 RPM (Crankshaft speed)
100 (75)
Rated plunger load: pounds (kg)
6600 (2994)
Maximum discharge pressure: psi (kPa)
"L" model: 1220 (8408)
"M" model: 2744 (18919)
"H" model: 5378 (37081)
Crankshaft extension:
Diameter, in.(mm): 3.000 (95.25)
Length, in.(mm): 5.13 (130.3)
Keyway width x depth, in.(mm):
3/4 x 3/8 (19.1 x 9.5)
Maximum recommended sheave diameter, in.(mm):
50 (1270)
For larger sizes: Contact IEQ
Pinion shaft extension:
if gear reducer is supplied, in.(mm)
For belt or chain drive: Contact Factory
For direct drive: Diameter, in.(mm): 2.000 (50.8)
Length, in.(mm): 4.25 (108.0)
Keyway width x depth, in.(mm):
1/2 x 1/4 (12.70 x 6.35)
Accessory gear reduction unit:
3.00:1, 3.12:1, 3.23:1, 3.36:1, 3.49:1
3.62:1, 3.78:1, 3.94:1, 4.11:1, 4.29:1,
4.48:1, 4.69:1, 4.93:1, 5.17:1
Oil Capacity: gallons (L)
Crankcase: 2.50 (9.46)
Gear Reducer varies with ratio:
1.25 to 1.50 (4.73 to 5.68)
Weight: pump only on wood shipping skids, pounds (kg)
"L" model: 1740 (649.4)
"M" model: 1600 (597.2)
"H" model: 1820 (679.3)
Standard Materials for Fluid Ends:
"L" model
Cast Duplex Stainless Steel
Cast Nickel Aluminum Bronze
Forged/Plate Carbon Steel
"M" model
Cast Duplex Stainless Steel
Cast Nickel Aluminum Bronze
Forged/Plate Carbon Steel
"H" model
Forged/Plate Carbon Steel
| Pump Model | Flange Connections | Dimensions (Inches) | ||||||
| Discharge Connection Sizes | Suction Connection Sizes | A | B | C | D | E | F | |
| 101T-4L | 3 ANSI 600 FF | 6 ANSI 150 FF | 4 5/8 | 7 7/8 | 21 | 33 3/4 | 48 3/8 | 9 3/8 |
| 101T-4M | 2 ANSI 1500 FF | 4 ANSI 300 FF | 5 1/16 | 6 3/16 | 21 | 33 3/8 | 47 9/16 | 9 |
| 101T-4H | 2 ANSI 2500 RJ | 3 ANSI 2500 RJ | 5 1/8 | 6 1/8 | 30 1/8 | 36 3/4 | 52 7/16 | 11 7/8 |
Performance Data
| PUMP | English Units | 50 RPM | 150 RPM | 250 RPM | 300 RPM | 350 RPM | 400 RPM | ||||||||||
| Plunger Dia. In. | Plunger Area Sq. In. | BPD per RPM | GPM per RPM | Max. Press. PSI | BPD | GPM | BPD | GPM | BPD | GPM | BPD | GPM | BPD | GPM | BPD | GPM | |
| 101T-4L (T100-4) | 3.375 | 8.9462 | 17.9255 | 0.5228 | 738 | 897 | 26.1 | 2689 | 78.4 | 4482 | 130.7 | 5378 | 156.8 | 6274 | 183.0 | 7171 | 209.1 |
| 3.250 | 8.2958 | 16.6223 | 0.4848 | 796 | 832 | 24.2 | 2494 | 72.7 | 4156 | 121.2 | 4987 | 145.4 | 5818 | 169.7 | 6649 | 193.9 | |
| 3.125 | 7.6699 | 15.3682 | 0.4482 | 861 | 769 | 22.4 | 2306 | 67.2 | 3843 | 112.1 | 4611 | 134.5 | 5379 | 156.9 | 6148 | 179.3 | |
| 3.000 | 7.0686 | 14.1634 | 0.4131 | 934 | 709 | 20.7 | 2125 | 62.0 | 3541 | 103.3 | 4250 | 123.9 | 4958 | 144.6 | 5666 | 165.2 | |
| 2.875 | 6.4918 | 13.0077 | 0.3794 | 1017 | 651 | 19.0 | 1952 | 56.9 | 3252 | 94.8 | 3903 | 113.8 | 4553 | 132.8 | 5204 | 151.8 | |
| 2.750 | 5.9396 | 11.9012 | 0.3471 | 1111 | 596 | 17.4 | 1786 | 52.1 | 2976 | 86.8 | 3571 | 104.1 | 4166 | 121.5 | 4761 | 138.8 | |
| 2.625 | 5.4119 | 10.8438 | 0.3163 | 1220 | 543 | 15.8 | 1627 | 47.4 | 2711 | 79.1 | 3254 | 94.9 | 3796 | 110.7 | 4338 | 126.5 | |
| 101T-4M (T100-3) | 2.500 | 4.9087 | 9.8357 | 0.2869 | 1345 | 492 | 14.3 | 1476 | 43.0 | 2459 | 71.7 | 2951 | 86.1 | 3443 | 100.4 | 3935 | 114.7 |
| 2.375 | 4.4301 | 8.8767 | 0.2589 | 1490 | 444 | 12.9 | 1332 | 38.8 | 2220 | 64.7 | 2664 | 77.7 | 3107 | 90.6 | 3551 | 103.6 | |
| 2.250 | 3.9761 | 7.9669 | 0.2324 | 1660 | 399 | 11.6 | 1196 | 34.9 | 1992 | 58.1 | 2391 | 69.7 | 2789 | 81.3 | 3187 | 92.9 | |
| 2.125 | 3.5466 | 7.1063 | 0.2073 | 1861 | 356 | 10.4 | 1066 | 31.1 | 1777 | 51.8 | 2132 | 62.2 | 2488 | 72.5 | 2843 | 82.9 | |
| 2.000 | 3.1416 | 6.2948 | 0.1836 | 2101 | 315 | 9.2 | 945 | 27.5 | 1574 | 45.9 | 1889 | 55.1 | 2204 | 64.3 | 2518 | 73.4 | |
| 1.875 | 2.7612 | 5.5326 | 0.1614 | 2390 | 277 | 8.1 | 830 | 24.2 | 1384 | 40.3 | 1660 | 48.4 | 1937 | 56.5 | 2214 | 64.5 | |
| 1.750 | 2.4053 | 4.8195 | 0.1406 | 2744 | 241 | 7.0 | 723 | 21.1 | 1205 | 35.1 | 1446 | 42.2 | 1687 | 49.2 | 1928 | 56.2 | |
| 101T-4H (T100-2) | 1.625 | 2.0739 | 4.1556 | 0.1212 | 3182 | 208 | 6.1 | 624 | 18.2 | 1039 | 30.3 | 1247 | 36.4 | 1455 | 42.4 | 1663 | 48.5 |
| 1.500 | 1.7671 | 3.5408 | 0.1033 | 3735 | 178 | 5.2 | 532 | 15.5 | 886 | 25.8 | 1063 | 31.0 | 1240 | 36.1 | 1417 | 41.3 | |
| 1.375 | 1.4849 | 2.9753 | 0.0868 | 4445 | 149 | 4.3 | 447 | 13.0 | 744 | 21.7 | 893 | 26.0 | 1042 | 30.4 | 1191 | 34.7 | |
| 1.250 | 1.2272 | 2.4589 | 0.0717 | 5378 | 123 | 3.6 | 369 | 10.8 | 615 | 17.9 | 738 | 21.5 | 861 | 25.1 | 984 | 28.7 | |
| Brake Horsepower required | 13 | 38 | 63 | 75 | 88 | 100 | |||||||||||
| PUMP | Metric Units | 50 RPM | 150 RPM | 250 RPM | 300 RPM | 350 RPM | 400 RPM | ||||||||||
| Plunger Dia. mm | Plunger Area cm2 | M3/Hr per RPM | L/Sec. per RPM | Max. Press. kPa | M3/Hr | L/Sec. | M3/Hr | L/Sec. | M3/Hr | L/Sec. | M3/Hr | L/Sec. | M3/Hr | L/Sec. | M3/Hr | L/Sec. | |
| 101T-4L (T100-4) | 86 | 57.717 | 0.1187 | 0.0330 | 5087 | 5.9 | 1.6 | 17.8 | 4.9 | 29.7 | 8.2 | 35.6 | 9.9 | 41.6 | 11.5 | 47.5 | 13.2 |
| 83 | 53.521 | 0.1101 | 0.0306 | 5485 | 5.5 | 1.5 | 16.5 | 4.6 | 27.5 | 7.6 | 33.0 | 9.2 | 38.5 | 10.7 | 44.0 | 12.2 | |
| 79 | 49.483 | 0.1018 | 0.0283 | 5933 | 5.1 | 1.4 | 15.3 | 4.2 | 25.4 | 7.1 | 30.5 | 8.5 | 35.6 | 9.9 | 40.7 | 11.3 | |
| 76 | 45.604 | 0.0938 | 0.0261 | 6438 | 4.7 | 1.3 | 14.1 | 3.9 | 23.5 | 6.5 | 28.1 | 7.8 | 32.8 | 9.1 | 37.5 | 10.4 | |
| 73 | 41.883 | 0.0862 | 0.0239 | 7010 | 4.3 | 1.2 | 12.9 | 3.6 | 21.5 | 6.0 | 25.8 | 7.2 | 30.2 | 8.4 | 34.5 | 9.6 | |
| 70 | 38.320 | 0.0788 | 0.0219 | 7661 | 3.9 | 1.1 | 11.8 | 3.3 | 19.7 | 5.5 | 23.6 | 6.6 | 27.6 | 7.7 | 31.5 | 8.8 | |
| 67 | 34.915 | 0.0718 | 0.0200 | 8408 | 3.6 | 1.0 | 10.8 | 3.0 | 18.0 | 5.0 | 21.5 | 6.0 | 25.1 | 7.0 | 28.7 | 8.0 | |
| 101T-4M (T100-3) | 64 | 31.669 | 0.0651 | 0.0181 | 9270 | 3.3 | 0.90 | 9.8 | 2.7 | 16.3 | 4.5 | 19.5 | 5.4 | 22.8 | 6.3 | 26.1 | 7.2 |
| 60 | 28.581 | 0.0588 | 0.0163 | 10272 | 2.9 | 0.82 | 8.8 | 2.5 | 14.7 | 4.1 | 17.6 | 4.9 | 20.6 | 5.7 | 23.5 | 6.5 | |
| 57 | 25.652 | 0.0528 | 0.0147 | 11445 | 2.6 | 0.73 | 7.9 | 2.2 | 13.2 | 3.7 | 15.8 | 4.4 | 18.5 | 5.1 | 21.1 | 5.9 | |
| 54 | 22.881 | 0.0471 | 0.0131 | 12831 | 2.4 | 0.65 | 7.1 | 2.0 | 11.8 | 3.3 | 14.1 | 3.9 | 16.5 | 4.6 | 18.8 | 5.2 | |
| 51 | 20.268 | 0.0417 | 0.0116 | 14485 | 2.1 | 0.58 | 6.3 | 1.7 | 10.4 | 2.9 | 12.5 | 3.5 | 14.6 | 4.1 | 16.7 | 4.6 | |
| 48 | 17.814 | 0.0366 | 0.0102 | 16481 | 1.8 | 0.51 | 5.5 | 1.5 | 9.2 | 2.5 | 11.0 | 3.1 | 12.8 | 3.6 | 14.7 | 4.1 | |
| 44 | 15.518 | 0.0319 | 0.0089 | 18919 | 1.6 | 0.44 | 4.8 | 1.3 | 8.0 | 2.2 | 9.6 | 2.7 | 11.2 | 3.1 | 12.8 | 3.5 | |
| 101T-4H (T100-2) | 41 | 13.380 | 0.0275 | 0.0076 | 21942 | 1.4 | 0.38 | 4.1 | 1.1 | 6.9 | 1.9 | 8.3 | 2.3 | 9.6 | 2.7 | 11.0 | 3.1 |
| 38 | 11.401 | 0.0235 | 0.0065 | 25751 | 1.2 | 0.33 | 3.5 | 1.0 | 5.9 | 1.6 | 7.0 | 2.0 | 8.2 | 2.3 | 9.4 | 2.6 | |
| 35 | 9.580 | 0.0197 | 0.0055 | 30646 | 1.0 | 0.27 | 3.0 | 0.82 | 4.9 | 1.4 | 5.9 | 1.6 | 6.9 | 1.9 | 7.9 | 2.2 | |
| 32 | 7.917 | 0.0163 | 0.0045 | 37081 | 0.8 | 0.23 | 2.4 | 0.68 | 4.1 | 1.1 | 4.9 | 1.4 | 5.7 | 1.6 | 6.5 | 1.8 | |
| Kilowatts required | 10 | 28 | 47 | 56 | 65 | 75 | |||||||||||
For operation below 100 RPM, an auxiliary lubrication system is required.
Volumetric Rate is based on 100% Volumetric Efficiency. Brake Horsepower/Kilowatts Required is based on 90% Mechanical Efficiency.